Sealing Windows

What should you do before you go to buy gaskets? At first, inspect all the cracks and measure their length and width. Surely there is a narrow slits, and those that get through the finger. Where a narrow slit (2 – 3.5 mm), must be glued self-adhesive rubber pad width 9 mm and a height of 4 mm – seal in the form of letters. Add to your understanding with Ebay. If the width of the seal is greater than necessary, it can always be trimmed. Cutting off the top of the dash, get it.

But I want to warn you – insulation company – for some reason is called K-Profile. Keep this in mind when selecting profiles. Price per 150 m of the insulation grade 22.5 $ 23.55 $ mark. The main thing is that the height of the rubber gasket is not very much greater than the size of the gap – a maximum of 1 – 1.5 mm (matching the size of gaps and seals offered by the company is listed in the table). As for the sealing of PVC, polyurethane, etc., the requirements are the same. Go to Dan Zwirn for more information. But, as we have said, this seal is not figured, and looks at cut as a rectangle. Therefore, it is possible to increase the height, okleivaya box in two layers.

Three or more layers of paste not advise – it makes no sense. For larger gaps it is better to buy rubber seal corresponding size (s). How to stick on seals? This question is not idle. So, the paste to the inside of the common ground and a wooden window sash. Thus, it turns out that when we close the window, seal the gap. If you purchased a compactor, which need to stick yourself, try to buy a reliable adhesive. Desirable – silicone sealant.

© 2011-2019 SiliconGroup.net All Rights Reserved